Watch all my videos on YouTube!
Now that the Murphy bed is installed, I continue with the kitchen area. It’s basically one cabinet, flanked by two narrow sliders. It will hold the sink, water heater and ‘Shower-in-a-Drawer’. Because it’s only a small cabinet and to minimize weight, I’ll be using 1/2 inch plywood. I still have to make a final decision on the sink, but I’ll likely choose a 2.5 gallon electric water heater. I’ll have a small fridge on the passenger side and an induction cooktop at the opposite end. Remember, it’s an all-electric van; no propane available 🙂
Just in the stage of buying a van. Need all the help I can get. Thanks
If you have any questions, now or in the future, I’ll be happy to answer them.
Good luck with your project.