Lately I am working on the van, whenever I have an hour available. This time I removed the rear door panels. They were mostly attached with hidden plastic plugs. I’m thinking of slightly enlarging the openings and creating some additional storage area inside the doors.
Category: General
Subfloor removal
First thing I noticed was some water damage to the subfloor, which is to be expected after 20 years of use. It will be replaced with a regular ½ inch plywood panel. The wood is attached with a couple of metal screws to the metal floor. The rear 4 feet doesn’t have any insulation at… Continue reading Subfloor removal
Window frame & seat belts
Today’s first is the passenger side, large window frame. A fairly simple job, just a lot of screws. I’ll set this frame apart until I have the correct paint to redo it. Now we can see a little of the insulation used, some wire of the valance lighting which will be removed, and the… Continue reading Window frame & seat belts
More dismanteling
I have started preparing the wood for the bed in my workshop, which takes up one half of my garage. I’ll have to glue up thinner boards to get to the right thickness for the wood in the frame of the bed. In the meantime, I am getting the rear belt systems out. Removing the… Continue reading More dismanteling
Removal cont. 2
I have two lights that switch on when the rear doors are opened. They have to be removed, but I have plans to reinstall one or both of them at a later time, so I have to be careful not to damage them. Everything nicely installed with connectors and screws, thus it took me only… Continue reading Removal cont. 2
Removal cont. 1
After yesterday’s sofa bed, today I’ll keep it simple by only removing a few small items. Next in line is the inside luggage rack, composed of just a few strips attached thru the carpet to the subfloor. Those were gone a few minutes later. Originally I bought this van as a Mark III conversion van;… Continue reading Removal cont. 1
Time for the Beast
Lots of planning, designing and redesigning has taken place. Now it is time to do the physical work. Today I started to remove the sofa bed. A quick look showed it was attached with 4 bolts to the car frame. Working alone could have been a problem, but I managed to… Continue reading Time for the Beast